Paper Production and Packaging Line ALM-A4

Features

2.1. Equipment Technologies

We explain the functions and workflow related to paper products as a technology of our machine: Opening → Cutting → Conveying → Collecting → Packing.

A.1. Main Technical Parameters

A.2. Standard Configuration

1. Unwinding Rack (1 Set = 2 Rolls)

Type A-1: ​​CHM-A4-2

1) Machine Type:

2 sets of paper racks without axle can be placed on each machine table.

2) Paper Roll Diameter:

Max. Ф1400mm

3) Paper Roll Width:

Max. Ф850mm

4) Paper shelf material:

Steel

5) Clutch device:

Air brake and control

6) Clutch lever adjustment

Manual adjustment according to hydraulic pressure

7) Paper core difficulty

3"(76.2mm) Air expansion

Axis mirror

2. Automatic tension control system

Type A-2: Automatic tension control system

1) When the paper passes through the sensor, automatic feedback is provided to the PLC control system to increase the brake load, and increase or decrease the tension to automatically control the paper tension.

3. High precision cutting blade system

Type A-3: High precision cutting blade system

1) Since the upper and lower blades are rotating, the cutting accuracy is very high.

2) Anti-bending device includes one set of square bars and steel wheel. From the paper edge unit that can adjust and level the paper square.

3) 5 sets of slitting blades

The top slitting blade is made by air pressure And spring.

The lower blade, connected to a special drive mechanism (diameter is Ф180 mm) and moved by spring. The upper and lower circular blade are made of SKH. The lower blade for slitting (diameter is Ф202 mm) and is driven by belts in the same stage. The lower blade for slitting consists of 5 groups, each group has two blade edges.

Paper width:

Total width 850 mm, net width 840 mm

Number of pieces:

2 pieces - A4 210 mm (width)

Paper roll diameter:

Max. Ф1400mm. Min. Ф600mm

Paper core diameter:

3 inches (76.2 mm) or 6 inches (152.4 mm) or as per customer's request

Packaging paper quality:

High-quality copy paper; High-quality office paper; High-quality tree-free paper etc.

Paper Weight:

60-100gsm

Page Length:

297mm (Specially designed for A4 paper, cutting length 297mm)

Bulk Quantity:

500 sheets max. Height: 45-55mm

Production Speed:

Max. 0-250m/min (depending on paper quality)

Max. Cutting Number:

Max. 841/min

Bulk Output:

Max. 12 rolls/min

Cutting Load: 100gsm (1×100gsm)

Cutting Accuracy:

±0.2mm

Paper Cutting Requirements:

No change in speed, no breaks, cut the whole sheet at once and need the right sheet.

Mains voltage:

3*380V/50Hz

Input:

220VAC/24VDC

Power:

22KW

Air consumption:

200NL/min

Air pressure:

6 sticks

Edge:

5~15mm*2

Safety standard:

Designed according to safety standard

4) Paper feeding wheel

Upper wheel:

Ф200*550mm (rubber coated)

Lower wheel:

Ф400*550mm (anti-slip)

5) Cutting blade set

Upper cutting blade:

1pc 550mm

Lower cutting blade:

1pc 550mm

6) Drive set (high precision belt drive mechanism and special drive mechanism)

7) Main drive motor set: 15KW

4. Conveying system

A-4.Type: Conveying system

1) Flatbed conveying Interlocking

2) High-speed conveyor belt and pressure wheel. Printing paper matched with upper and lower conveyor belt, automatic tensioning and closing system.

3) Fixed removal device (including fixed removal rod)

And negative ion generator)

5. Paper collection system

A-5 Type: Paper collection system

1) Automatic device that moves the paper stack up and down

2) The running device and the clapping paper are regulated. Control with air tank,

When the design paper, the cylindrical paper strip is cut and moved up and down.

After the paper is transferred to the strip, carry it diagonally to the packaging table.

6. Accessories

A-6 Type: Accessories

Cross blade

:

1 set 550mm Material: Tungsten steel fitting

(including lower blade and upper blade)

Upper cutting blade

:

5pcs Ф150mm Material: SKH

Lower cutting blade

:

5pcs Ф202mm Material: SKH