Electrostatic Car Rim Paint Drying Machine

*Designed to reduce heat loss.

The inner surface of the oven, which consists of sandwich-type interlocking panels, is made of galvanized metal sheets, and the outer surface is made of DKP powder-coated metal sheets.

*300°C resistant silicone is used in wall panel joints.

* The side walls of the oven are insulated with 150 mm thick stone wool.

* The combustion chamber area is insulated with a total of 150mm of stone wool.

*The circulation fan is suitable for operation at 250°C.

*The interior of the oven contains channels for uniform air distribution and adjustable air blowing nozzles. The system, which operates on the principle of closed-circuit air circulation, reaches the required temperature in a short time.

*The temperature is controlled by a digital thermostat. Fuel economy is maintained at maximum.

* The resistance thermal cell is installed in the heating unit at the back of the oven and has the ability to raise the oven temperature to 250°C.

*The thermal cell consists of serpentine tube type resistors with an increased surface placed in an oblique manner and is designed to provide maximum heat transfer as air passes through this area.

*The walls of the heating unit are insulated with 150 mm thick rock wool. There is an electrical installation and electrical control panel on the unit.